Galvanic finishes are obtained by immersing our products in ‘’baths’’.
At each immersion, a layer of finish is deposited on the tap, guaranteeing a result that is pleasing to the eye and to the touch.
05 Chrome
37 Antique Copper
53 Brushed Chrome
55 Brushed Nickel
56 Antique Brass
57 Rose Gold
59 Gold
60 Brushed Gold
The painting process is obtained through the deposition of powder on the surface of the faucet. The metal is then heated using ovens at very high temperatures to allow the powder to dissolve, ensuring a stable finish.
13 Anthracite Black
40 White Granite
41 Beige Granite
43 Black Granite
63 Matt White
79 Matt Black
PVD is a thin film metallic deposit. High chemical and physical performances, resistance to scratching, corrosion and abrasion. The possibility of obtaining different types of colours, the non-toxicity of the product and the total lack of environmental impact of the production cycle complete the fundamental characteristics.
PV53 Brushed Chrome
PV56 PVD Brushed Copper
PV57 PVD Copper
PV59 PVD Gold
PV60 PVD brushed Gold
PV70 PVD Black Nickel
PV75 PVD brushed Black Nickel
10 Brushed Stainless Steel
11 Super Mirror Stainless Steel
Clean the surface of the taps (whether in galvanic, painted, pvd or natural finish) daily and exclusively with a soft cloth and water. We also recommend that you never delay drying any drops of water on the product, which could lead to the formation of limescale deposits that are difficult to remove.
Otherwise, as an alternative to water, If the limestone was deposited on the tap it would be possible to clean the surfaces with water and soap or with delicate detergents. We recommend not to spray detergents directly on mixers or showers, but on a soft cloth using it to clean the interested surfaces. Finally, rinse mixers and showers with clean running water after cleaning, making sure to dry carefully.
Clean taps prestigious surfaces (Carrara Marble, Corian, Wood, Crystal) daily and exclusively with a soft cloth and water, or with delicate detergents. We recommend also not to postpone the drying of any water drops present on the product, that could lead to the formation of limestone deposits that are hard to remove.
Otherwise, as an alternative to water, If the limestone was deposited on the tap it would be possible to clean the surfaces with water and soap or with delicate detergents. We recommend not to spray detergents directly on mixers or showers, but on a soft cloth using it to clean the interested surfaces. Finally, rinse mixers and showers with clean running water after cleaning, making sure to dry carefully.
For showerheads and shower columns we recommend a frequent use (at least once every 5 days) to prevent limestone creation. An occasional use favours sedimentation and the emergence of malfunction and abnormal water spray. Periodically, we suggest to push slightly on the silicone nozzles to free them from limestone creation within them (anti-limescale nozzles system).
We recommend not to use detergents, abrasive, solvents, chemical agents, muriatic acid based substances, ammonia, acetone, bleach, domestic use acid, various disinfectants, straws and/or rough and/or metallic sponges that could ruin irreparably the surface of taps.